23* small block chevy? - Page 6

Drag Radial · 06-11-2009, 07:15 PM

I'm getting ready to put our 406 back in and do some testing to see how much better the Eddy 23 degree RR Victor Head is compared to my old school 867 Pontiacs. Hopefully the numbers work right and we get it into the 5.40 range with a single stage plate, progressive, and 3100 lbs on a 275. We already went 5.84/118 with it on a 65N jet so I'm thinking we can do it!

joey · 06-11-2009, 07:23 PM

Quote:

Originally Posted by Drag Radial

I'm getting ready to put our 406 back in and do some testing to see how much better the Eddy 23 degree RR Victor Head is compared to my old school 867 Pontiacs. Hopefully the numbers work right and we get it into the 5.40 range with a single stage plate, progressive, and 3100 lbs on a 275. We already went 5.84/118 with it on a 65N jet so I'm thinking we can do it!

Those Edelbrock heads that much better? Or is it a different block/bore too?

nastynovaII · 06-11-2009, 08:44 PM

Quote:

Originally Posted by cutlass406

here's a pick of my engine that runs 5.50's compared to his that runs 5.0's who's would you be more scared of ?

There's an old saying "Never judge a book by it's cover" kinda of inside joke on my end about a guy we know that use to have a car that sorta looked like a Pro Mod but only ran 12.90's with a Blown BB Mopar. But anyway you get the drift........

Mike Beck · 06-11-2009, 09:01 PM

Alan, that is trully one bad import dude! Very impressive to say the least.

So you can de-tune it a little bit and run the 8.50 class with that bad boy.

I lvoe those $50 valve covers.

If I saw that engine and you said you wanted to race heads-up I would say go for it buddy. I'd be watching you pull-away from me the entire track. In fact, you would probably be pulling off the damn track as I was going through the traps!

But, I know better after meeting you at Steves class.

Good luck with it. I wanna see you bring that up to E-Town sometime.

1 bad import · 06-11-2009, 09:46 PM

i have some vids trying to get the car dialed in for the index ,,i can run the number on 2 stages pretty consistant with 200 1st stage 100 second stage on a 2.5 second delay..
1st pass 45 seconds in is a 200 shot for an 8.70 been 8.67 best on 200.

then i have 3 more passes one 60 ft at 8:30 in
and the two 8.57 is at 6 min 35 seconds in
and finally as close as ive come to dialing the number was at 10min30sec for 8.52@158
this is from last october i think

http://videos.streetfire.net/video/A...tal_200823.htm

i havent had the luxury of another track rental where i had some freinds to tape but i have a wicked 1/8th mile vid from down sout hon a freinds camera ill have to grab ..

Drag Radial · 06-11-2009, 09:50 PM

Quote:

Originally Posted by joey

Those Edelbrock heads that much better? Or is it a different block/bore too?

No I'm going to try and keep everything the same when we get it back in the car.

Brand new Eddy Victors and new Wilson Super Victor VS the 867's and a Dart Wilson Intake.

joey · 06-12-2009, 10:32 AM

Quote:

Originally Posted by Drag Radial

No I'm going to try and keep everything the same when we get it back in the car.

Brand new Eddy Victors and new Wilson Super Victor VS the 867's and a Dart Wilson Intake.

Let us know the outcome

Drag Radial · 06-12-2009, 10:49 AM

Will do! Heck our little 383 with unported Vic Jrs went 5.88/115 this past weekend on an 85 jet in the same car so I am expecting big things when we hit the 406 with 300!

John Lowe · 06-12-2009, 11:40 AM

Quote:

Originally Posted by Drag Radial

Will do! Heck our little 383 with unported Vic Jrs went 5.88/115 this past weekend on an 85 jet in the same car so I am expecting big things when we hit the 406 with 300!

That's it I'm going home to throw rocks at my junk lol......

Drag Radial · 06-12-2009, 11:59 AM

Quote:

Originally Posted by John Lowe

That's it I'm going home to throw rocks at my junk lol......

Let me know if you need help John, we will be there (MIR) tonight without the car. And your car is FAR from junk!

cutlass406 · 06-12-2009, 04:00 PM

hey 1 bad import what size gear are you running on your car? for that matter what gear are most of you guy's running in the faster cars? mine has a 4.56 and i cant make it through the quarter mile on the kit runs out bout 900-1000ft.thinking bout going to a 4.10!

QIKLUV · 06-12-2009, 05:28 PM

4.33

388Monte · 06-12-2009, 05:30 PM

Quote:

Originally Posted by QIKLUV

4.33

Hows those pistons working out for you?

1 bad import · 06-12-2009, 05:47 PM

im running 3/73 gears with a 29.5 10.5 tire no w

QIKLUV · 06-12-2009, 06:07 PM

Quote:

Originally Posted by 388Monte

Hows those pistons working out for you?

working so damn good someone bought the whole damn truck...

sent you a PM....

06-11-2009, 07:15 PM	#76
Drag Radial Senior Member Smoked Another SBC Join Date: Sep 2005 Location: Working on the car. Posts: 8,023	*Re: 23 small block chevy?** I'm getting ready to put our 406 back in and do some testing to see how much better the Eddy 23 degree RR Victor Head is compared to my old school 867 Pontiacs. Hopefully the numbers work right and we get it into the 5.40 range with a single stage plate, progressive, and 3100 lbs on a 275. We already went 5.84/118 with it on a 65N jet so I'm thinking we can do it! __________________ Virginia Motorsports Park Ultimate Outlaws November 14, 2009 - 275 Radial Tire X275-RTCTTFMF

06-11-2009, 09:01 PM	#79
Mike Beck EFI/N2O JUNKIE Smoked another BBC Join Date: Aug 2007 Location: South River NJ Posts: 3,662	*Re: 23 small block chevy?** Alan, that is trully one bad import dude! Very impressive to say the least. So you can de-tune it a little bit and run the 8.50 class with that bad boy. I lvoe those $50 valve covers. If I saw that engine and you said you wanted to race heads-up I would say go for it buddy. I'd be watching you pull-away from me the entire track. In fact, you would probably be pulling off the damn track as I was going through the traps! But, I know better after meeting you at Steves class. Good luck with it. I wanna see you bring that up to E-Town sometime.

06-11-2009, 09:46 PM	#80
1 bad import Member Pullin gears Join Date: Jan 2008 Posts: 647	*Re: 23 small block chevy?** i have some vids trying to get the car dialed in for the index ,,i can run the number on 2 stages pretty consistant with 200 1st stage 100 second stage on a 2.5 second delay.. 1st pass 45 seconds in is a 200 shot for an 8.70 been 8.67 best on 200. then i have 3 more passes one 60 ft at 8:30 in and the two 8.57 is at 6 min 35 seconds in and finally as close as ive come to dialing the number was at 10min30sec for 8.52@158 this is from last october i think http://videos.streetfire.net/video/A...tal_200823.htm i havent had the luxury of another track rental where i had some freinds to tape but i have a wicked 1/8th mile vid from down sout hon a freinds camera ill have to grab .. __________________ powered by j&e performance,.. suspention, ..motor ,..and a set of heads ported in my basement .who says 23* arent fast ..856-227-8100..

06-12-2009, 10:49 AM	#83
Drag Radial Senior Member Smoked Another SBC Join Date: Sep 2005 Location: Working on the car. Posts: 8,023	*Re: 23 small block chevy?** Will do! Heck our little 383 with unported Vic Jrs went 5.88/115 this past weekend on an 85 jet in the same car so I am expecting big things when we hit the 406 with 300! __________________ Virginia Motorsports Park Ultimate Outlaws November 14, 2009 - 275 Radial Tire X275-RTCTTFMF

06-12-2009, 04:00 PM	#86
cutlass406 Member Pullin gears Join Date: Feb 2007 Location: natchez ms. Posts: 519	*Re: 23 small block chevy? hey 1 bad import what size gear are you running on your car? for that matter what gear are most of you guy's running in the faster cars? mine has a 4.56 and i cant make it through the quarter mile on the kit runs out bout 900-1000ft.thinking bout going to a 4.10! __________________ Heads up.. it's the only way! http://kingsofstreet.net chris carter**

06-12-2009, 05:28 PM	#87
QIKLUV Senior Member Smoked another BBC Join Date: Dec 2006 Location: Clute, Texas Posts: 1,082	*Re: 23 small block chevy?** 4.33 __________________ With my luck, if it was raining hookers, I'd get hit with a queer

06-12-2009, 05:47 PM	#89
1 bad import Member Pullin gears Join Date: Jan 2008 Posts: 647	*Re: 23 small block chevy?** im running 3/73 gears with a 29.5 10.5 tire no w __________________ powered by j&e performance,.. suspention, ..motor ,..and a set of heads ported in my basement .who says 23* arent fast ..856-227-8100..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode