mini tubbed foxes - Page 4

ReiKo · 11-20-2009, 06:07 PM

I made them this big so you can see on purpose...

image4you2see · 11-20-2009, 06:08 PM

Quote:

Originally Posted by sickboystang

http://

Is there some kind of wing on the back of the blue car in that pic?

sickboystang · 11-21-2009, 08:19 AM

we had some trouble with the wing and the trailer door! LOL, It has a plain deck lid on it now.

dirty93coupe · 11-23-2009, 07:02 PM

i have 15 x 10 with a 6.5 back spacing how much should i have mine narrow to look right
i want to run the 325's also but don't want them to far in
any suggestions thanks

86lxnotch · 11-23-2009, 08:14 PM

Quote:

Originally Posted by dirty93coupe

i have 15 x 10 with a 6.5 back spacing how much should i have mine narrow to look right
i want to run the 325's also but don't want them to far in
any suggestions thanks

2'' and you wont have to touch the outer lip

wickdgt · 11-25-2009, 03:37 PM

Wheel are Bogarts 11 x 15 with a 7.5 bs. Rear end shorten 1.25" on each side. M/T 325 50 15

Briansshop · 11-25-2009, 05:39 PM

15x10 5.5 BS 2" cut 275/60

stickcar1990 · 11-25-2009, 06:29 PM

i like the 2 4 eyed cars^^^^^^

heres my car. 15x12 7 inch backspace. 325 bfg... just got the paint on it.

BCP · 11-25-2009, 06:40 PM

Damn, they look badass!! Nicely done.

paxtonpwr · 11-25-2009, 08:08 PM

Sorry this was mislabeled and no editing after a post-

The wheel and tire on the drivers side is 15X10 w/ 6.5 BS and 325/50/15 MT DR, the passenger side is 15X10 w 5.5 BS and 275/60/15 MT DR rear narrowed little over 2" a side

Djstorm100 · 12-01-2009, 02:11 AM

may be dumb question by why do you have different sizes?

twistedstang · 12-01-2009, 03:28 AM

not quite done yet...

paxtonpwr · 12-01-2009, 10:16 AM

Quote:

Originally Posted by Djstorm100

may be dumb question by why do you have different sizes?

I have 2 sets of rims, one set for the 325-50-15 and another for the 275-60-15's - I like to use the 325 for true street races, and the other set for all the 275 stuff thats been getting hot around here lately. I had them both on there when it was getting minitubbed for mock up purposes

FourEyedFord · 12-01-2009, 02:57 PM

Quote:

Originally Posted by Briansshop

15x10 5.5 BS 2" cut 275/60

GOD, this car is awesome!!! Badass dude!

FourEyedFord · 12-01-2009, 03:02 PM

Here is mine: Narrowed 2.25 inches per side from stock length using 15x10s with a 6.5" backspace.

11-20-2009, 06:07 PM	#46
ReiKo YB Monster Crew Smoked Another SBC Join Date: May 2005 Location: Detroit Posts: 6,968	Re: mini tubbed foxes I made them this big so you can see on purpose... __________________

11-21-2009, 08:19 AM	#48
sickboystang Member Pullin gears Join Date: May 2009 Location: Celina, OH Posts: 700	Re: mini tubbed foxes we had some trouble with the wing and the trailer door! LOL, It has a plain deck lid on it now. __________________ *thanks to:* Jeff Wightman at www.Precision-Autosports.com Nelson's Body Shop (419)394-3411 Celina Custom Auto (419)919-2277 Outlaw 8.5 Hopeful(ly)!

11-23-2009, 07:02 PM	#49
dirty93coupe Junior Member Pre-Staged Join Date: Jun 2009 Location: porter tx Posts: 69	Re: mini tubbed foxes i have 15 x 10 with a 6.5 back spacing how much should i have mine narrow to look right i want to run the 325's also but don't want them to far in any suggestions thanks

11-25-2009, 03:37 PM	#51
wickdgt Junior Member Launchin Join Date: Mar 2006 Posts: 312	Re: mini tubbed foxes Wheel are Bogarts 11 x 15 with a 7.5 bs. Rear end shorten 1.25" on each side. M/T 325 50 15

11-25-2009, 05:39 PM	#52
Briansshop Junior Member Pre-Staged Join Date: Sep 2008 Location: Huntingtown,MD Posts: 81	Re: mini tubbed foxes 15x10 5.5 BS 2" cut 275/60

11-25-2009, 06:29 PM	#53
stickcar1990 Senior Member Smoked another BBC Join Date: Aug 2008 Location: Union, MO, 63084 Posts: 2,076	Re: mini tubbed foxes i like the 2 4 eyed cars^^^^^^ heres my car. 15x12 7 inch backspace. 325 bfg... just got the paint on it. __________________ http://www.loproracecars.com http://www.myspace.com/loproracecars Paul S.

11-25-2009, 06:40 PM	#54
BCP Junior Member Spooled up Join Date: Nov 2009 Location: Southern, Md. Posts: 135	Re: mini tubbed foxes Damn, they look badass!! Nicely done. __________________ Brian 89 Mustang LX hatch 02 SVT Focus -DD www.bcpetriephotography.com

11-25-2009, 08:08 PM	#55
paxtonpwr Member Pullin gears Join Date: May 2005 Location: S.NJ Posts: 696	Re: mini tubbed foxes Sorry this was mislabeled and no editing after a post- The wheel and tire on the drivers side is 15X10 w/ 6.5 BS and 325/50/15 MT DR, the passenger side is 15X10 w 5.5 BS and 275/60/15 MT DR rear narrowed little over 2" a side __________________ ALL OUT AUTOMOTIVE Support Your Local Speed Shop VORTECH~Tony's Metal Crafts~Harris Motorsports Dealer for vortech,trick flow,upr,summit,moser,keystone,mickey T. jegs,etc.. http://www.youtube.com/watch?v=QrZyMAUOCQQ please note any posts and opinions by me are solely mine and do not reflect or speak for anyone besides myself unless specifically noted Last edited by paxtonpwr; 11-25-2009 at 08:09 PM.

12-01-2009, 02:11 AM	#56
Djstorm100 Member Pullin gears Join Date: Oct 2009 Location: Raleigh Nc Posts: 646	Re: mini tubbed foxes may be dumb question by why do you have different sizes? __________________ 91 mustang 306ci 70mm turbo c4. I'm always looking for parts if you have some for sale let me know!!! 2008 evo X 2007 Harley Softtail Night Train

12-01-2009, 03:28 AM	#57
twistedstang Junior Member Pre-Staged Join Date: Dec 2008 Location: Port Huron MI Posts: 93	Re: mini tubbed foxes not quite done yet...

12-01-2009, 03:02 PM	#60
FourEyedFord Junior Member Spooled up Join Date: Mar 2008 Location: Blothru Bullsh!t Posts: 243	Re: mini tubbed foxes Here is mine: Narrowed 2.25 inches per side from stock length using 15x10s with a 6.5" backspace. __________________ 406w/Blothru Carb/91mm--88mm inlet 8.77 @ 165 (Just getting started) Last edited by FourEyedFord; 12-01-2009 at 03:05 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode